Lean Duplex 2304 (UNS S32304) Seamless Pipes & Tubes Manufacturer & Supplier

Duplex 2304 (UNS S32304) is a lean duplex stainless steel with minimal molybdenum content. It offers approximately double the yield strength of 304L while maintaining similar corrosion resistance. The lean composition makes it a cost-effective alternative to both 316L and standard duplex 2205.

UNS: S32304 | Category: Lean Duplex Stainless Steel | Werkstoff Nr: 1.4362 | EN Name: X2CrNiN23-4

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 80S

Chemical Composition (%)

CMnSiCrNiMoNCuPS
0.030 max2.50 max1.00 max21.5-24.53.0-5.50.05-0.600.05-0.200.05-0.600.040 max0.030 max

Mechanical Properties

Tensile Strength
600 MPa min
Yield Strength
400 MPa min
Elongation
25% min
Hardness
290 HBW max

Physical Properties

Density
7.75 g/cm3
Melting Range
1400-1450 C
Thermal Conductivity
17 W/m-K
Electrical Resistivity
800 nOhm-m
Specific Heat
480 J/kg-K
Coeff. of Thermal Expansion
13.0 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
~25
Max Service Temp (Oxidizing)
315 C
Intergranular Corrosion
Resistant
Stress Corrosion Cracking
Good resistance vs austenitic
General Corrosion Rate
Similar to 316L
Seawater Resistance
Moderate

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
S32304
Trade
SAF 2304
EN
1.4362

Frequently Asked Questions

What is the chemical composition of Duplex 2304?

Duplex 2304 contains C 0.030 max, Mn 2.50 max, Si 1.00 max, Cr 21.5-24.5, Ni 3.0-5.5, Mo 0.05-0.60, N 0.05-0.20, Cu 0.05-0.60, P 0.040 max, S 0.030 max (weight %).

What are the mechanical properties of Duplex 2304?

Tensile Strength: 600 MPa min; Yield Strength: 400 MPa min; Elongation: 25% min; Hardness: 290 HBW max.

What are the equivalent grades of Duplex 2304?

Nearest equivalents of Duplex 2304: S32304 (ASTM), SAF 2304 (Trade), 1.4362 (EN). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Defence supply Duplex 2304 to?

Duplex 2304 is supplied to ASTM A789 / ASME SA789, ASTM A790 / ASME SA790 and DIN EN 10216-5.

What sizes of Duplex 2304 are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is Duplex 2304 used for?

Duplex 2304 is used for Storage tanks and pressure vessels, Water heaters and heat exchangers, Building and construction structural members, Bridge structures, Transport tankers and Biofuel production equipment.